iASB (for commercial customers)
High-performance, convenient charging of electric vehicles for commercial users
The HT Easy charging station is designed for high-performance three-phase charging of electric vehicles according to the requirements of EN 61851-1, charging mode 3, in the residential environment.
Equipped with a 5-meter charging cable and a type 2 connector, it enables quick and convenient charging of all modern electric vehicles.
The charging stations are suitable for installation in enclosed spaces as well as outdoors.
Features
- Daily operation of the charging station is extremely easy. Charging starts automatically when the connector is plugged into the electric vehicle.
- A three-color light strip shows the status of the charging station and the charging process.
- Various interfaces are available for communication with other systems. They support device configuration and provide control capabilities via OCPP.
- Integrated charging control automatically optimizes utilization of tariff periods for electrical energy to help minimize the operating cost of electric vehicles.
- The charging station can also be used as an interruptible consumer device to take advantage of favorable tariffs, such as those offered for the operation of heat pumps.
- An integrated ground fault sensor is present for enhanced electrical safety. The only additional requirement is a Type A ground fault circuit interrupter in the home electrical installation.
Optional equipment
An RFID reader is available as special equipment. This allows control of charging station use in combination with RFID cards.
The optionally available pedestal is recommended for free-standing installations.
Technical Features
Charging controller: SECC01
Charging power: 11 kW
Charging power terminals: 5 x 6 mm²
Supply terminals SECC01: 3 x 2.5 mm²
Fixed charging cable, Type 2: 5 meter
Buttons: No
Display elements: 3x LED
Buzzer: Yes
DC monitor: Yes
Protection rating: IP 54
Impact resistance: IK8
Dimensions (WxHxD): 250 x 450 x 128 mm
Weight: approx. 6 kg
Functional Features
Operating modes: Automatic, Remote control
Charging modes: Immediate charging
Automatic load profile control: Yes
Software update: Automatic via Internet
Temperature monitoring: Yes
OCPP: Yes
EN 61851- 1: Yes
Ethernet: Yes
WLAN: (access point)
Configuration: Web GUI
Start charging: Plug & Charge
Stop charging: EV
Charging status indicator: Green LED
Charging mode indicator: Yellow LED
Fault indicator: Red LED
System update: LAN
Design Features
Integrated cable storage: Yes
Integrated connector holder: Yes
Housing color: White/Blue-Grey
Branding: EFR / On request
HT-ENERGY
RFID model plus meter and load management for commercial use.
Extended model-specific features:
RFID reader: Yes
Viewing window meter: Yes
Electricity meter: Yes
Dynamic load management: Yes
Operating modes: Automatic, Remote control, Local load management
Charging modes: Immediate charging, Low-cost charging
Automatic tariff-period control: Yes
RFID learning indication: Green/Yellow/Red LED cycle
HT-BUYXE
Power model with socket, for commercial use
Extended model-specific features:
Power socket instead of 5-meter charging cable: Yes
RFID reader: Yes
Viewing window meter: Yes
Electricity meter: Yes
Dynamic load management: Yes
Operating modes: Automatic, Remote control, Local load management
Charging modes: Immediate charging, Low-cost charging
Automatic tariff-period control: Yes
RFID learning indication: Green/Yellow/Red LED cycle
Your contact
Other charging boxes
Look here for other Smart Energy devices from our product portfolio.
